压铸机计算机控制系统研究

系统地介绍了28000kN压铸机计算机控制系统的设计。在硬件方面,输入输出板均采用了光隔,抗干扰能力强。在软件设计上,采用定时中断,即实现了高速采样,又可周期性地扫描输入输出端口的状态,循环发出动作指令,这种模拟可编程控制器的程序设计方法,大大提高了整个系统的性能。     

KTP晶体生长溶液中溶质和溶剂间的交互作用

本文采用红外光谱法对KTP晶体及其磷酸盐生长溶液进行了分析,得到有关KTP晶体及其生长溶液结构特征的一些信息。实验结果表明,KTP溶解于磷酸盐溶剂后,形成Ti(Ⅳ)的双齿配位的溶剂合物。本文据此讨论了KTP晶体生长溶液中溶质和溶剂的交互作用,提出了KTP晶体在磷酸盐溶剂中生长和溶解的反应机制,并对KTP晶体生长溶液粘度较大的问题进行了解释,提出了工艺上的一些改进办法。     

Face recognition using Elasticfaces

Though principle component analysis (PCA) and locality preserving projections (LPPs) are two of the most popular linear methods for face recognition, PCA can only see the Euclidean structure of the training set and LPP preserves the nonlinear submanifold structure hidden in the training set. In this paper, we propose the elastic preserving projections (EPPs) which by incorporating the merits of the local geometry and the global information of the training set. EPP outputs a sample subspace which simultaneously preserves the local geometrical structure and exploits the global information of the training set. Different from some other linear dimensionality reduction methods, EPP can be deemed as learning both the coordinates and the affinities between sample points. Furthermore, the effectiveness of our proposed algorithm is analyzed theoretically and confirmed by some experiments on several well-known face databases. The obtained results indicate that EPP significantly outperforms its other rival algorithms.     

Determination of the modified effect of nano-SiO2 by titration in nonaqueous phase

The dispersion of nanosilica that was modified and original in organic solvents could be judged directly by using methyl red as the indicator, and the principle of color development was also discussed. A method has been developed for the determination of the acidity of solid surfaces, which consists of titration of the solid suspended in benzene with n-butyl amine, using neutral red as the indicator. Basic indicator forms a red color on acidic solids, and the end-point of the titration is the disappearance of the red color. The text was submitted by the authors in English.     

Surface modification of nano-SiO2 by in situ grafted polymerization of butyl methacrylate

Silane coupling agent was used to introduce polymeric groups that was C=C onto the surface of nano-SiO₂ particles by self-assembling technique. Then, in situ grafted polymerization was carried out between the functionalized particles and butyl methacrylate monomers under the action of an initiating agent to accomplish the surface modification of nano-SiO₂. The effect of different reaction conditions on grafting percentage was studied, and analyses of FTIR, TEM, and TG-DTA results show that new organic chains were introduced onto the surface of nano-SiO₂, and the dispersion stability of nano-SiO₂ in THF was obviously improved. The text was submitted by the authors in English.     

基于遗传算法的B样条曲线自动光顺算法

文章基于遗传算法,将节点删除法和能量法结合,提出了一种光顺B样条曲线的新方法。该方法的基本思想是:在误差允许范围内,通过遗传算法自动确定B样条曲线需要光顺的部分,然后在保证曲线能量最小的前提下,删除不光顺处的节点。实践证明,该算法具有自动性和客观性,并在光顺曲线的同时达到了数据压缩的目的。     

基于Quick Server的IPv6 Ftp服务器设计与实现

基于QuickServer设计并实现了支持IPv4和IPv6协议的Ftp服务器。对IPv4环境中的应用程序向IPv6迁移进行了实质性的探索和研究。     

Q型聚类分析在确定成矿脉岩中的应用——以桦甸大庙子-菜抢子金矿区为例

吉林桦甸大庙子-菜抢子金矿区脉岩十分发育，且与成矿关系密切。通过近两年对该矿区实际地质调查研究，并重新采集各矿床脉岩、矿石样品30件，以Au、Ag、Cu等8种成矿元素作为变量，用Q型聚类分析的相关系数法进行了统计计算，计算得出金-黄铁矿型矿体与辉绿岩、煌斑岩、花岗斑岩有关；金-多金属型矿体主要与二长花岗斑岩、闪长玢岩有关，并与实际地质调查认识一致。由此明确了本矿区随着岩浆由中性向酸性演化，成矿由贵金属向多金属矿化转变。并在空间上形成叠加．     

CSP热连轧机振动性质的确定

针对某钢厂CSP热连轧机出现的振动问题,综合运用现场实测和计算机仿真的方法对轧机振动的性质进行了系统的分析,并得到了如下初步结论:工作辊水平方向的振动是由主传动系统的扭转振动引起的强迫振动。     

深脱硫钢在LF炉中的脱硫处理

讨论了LF炉添加脱硫剂对深脱硫钢进行脱硫的机理、脱硫剂的渣系选择及组成,并结合生产情况,着重介绍了LF炉添加脱硫剂的应用技术和效果.